- 027 546 9736
- hannes@distinctionaudio.co.nz
- Tue - Fri: 10:00am - 16:00pm | Saturday : 10:00 - 14:00 | Sunday: By appointment
Stereo audio was originally designed to separate recorded sound into two channels (that is what the term “stereo” means), with left and right channel speakers placed in front of the room. Although some sounds come specifically from the left or right channel speakers, principle vocals or dialog are mixed into both speakers.
With the vocals mixed to come out of both the left and right channels, a “sweet spot” is created that is equidistant between the left and right channel speakers. This gives the listener the illusion that the vocals are coming from a phantom centre spot between left and right channel speakers.
Although this is an effective way to present vocals, as you move the listening position from the sweet spot to either the left or right, even though the dedicated left and right sounds stay in their relative positions dictated by the left and right channel speaker, the position of the vocals will (or should) move with you.
You can also hear this effect by using the stereo receiver or amplifier’s balance control. As you dial the balance control to the left or right, you can hear the vocals change position accordingly.
As a result, in a traditional stereo setup, since the vocals are coming from both the left and right channels, you can’t control the position or level (volume) of the center channel vocals independently from the left and right channels.
Surround sound provides an effective solution to the center channel problem posed by two-channel stereo listening.
Unlike stereo, in a true surround sound setup, there is a minimum of 5.1 channels with speakers allocated as follows: front L/R, surround L/R, subwoofer (.1), and dedicated centre channel speaker. Surround sound formats, such as Dolby and DTS, feature sounds that are mixed into each of those channels, including sounds specifically directed to a centre channel. This encoding is provided on DVDs, Blu-ray/Ultra HD Blu-ray Discs, and some streaming and broadcast content.
As a result of how sounds are mixed for surround sound, instead of having the vocals/dialog placed in a phantom centre spot, it is placed in a dedicated centre channel. Due to this placement, the centre channel requires its own speaker.
Although the added centre speaker results in a little more clutter, there are distinct advantages.
If you don’t have (or don’t want to have) a centre channel speaker in a surround sound setup, it’s possible to “tell” your home theatre receiver via its speaker setup options that you don’t have one.
If you use that option, what happens is that the receiver “folds” what would be the centre channel sound into the left and right front main speakers, just as it would in a stereo setup. As a result, the centre channel doesn’t have a dedicated centre anchor spot and succumbs to the same limitations described for vocals/dialog in stereo setups. You wouldn’t be able to adjust the centre channel volume level independent of the left and right front channel channels.
You can use any speaker (except a subwoofer) for your center channel, but ideally, you’d use a speaker that has a horizontal, rather than vertical, or square, cabinet design, such as the example shown below from Bowers & Wilkins
The reason for this is not so much technical, but aesthetic. A horizontally-designed centre channel speaker can be more easily placed above or below a TV or video projection screen.
If you are adding a centre channel speaker to an existing speaker setup, try to go with the same brand, and similar mid-range and high-end frequency response capability, as your main left and right speakers.
The reason for this is that the entire left, centre, right channel sound-field should sound the same to your ear. This is referred to as “timbre-matching.”
If you are unable to obtain a centre channel speaker with similar characteristics of your left and right front channel speakers, if your home theatre receiver has an automatic speaker setup system, it may be able to compensate using its equalisation capabilities.
Another option that you can try is if you are putting together a basic home theatre setup from scratch, buy a speaker system that includes the entire speaker mix—front left/right, surround left/right, subwoofer, and the centre channel.
If you are upgrading from two-channel stereo to a full home theatre surround sound setup, whether you use a centre channel speaker is up to you, but here are the main things to consider:
At Distinction Audio, we stock all kinds of speakers including surround speakers, active speakers, bookshelf speakers, in-ceiling speakers, floorstanding speakers, centre speakers, in-wall and on-wall speakers, outdoor speakers, sound bars, subwoofers, and mini home theatres. We also have speaker sets.
Our speakers are sourced from some of the world’s best known brands including Wharfedale, Bowers & Wilkins, Magnat, Yamaha, Cambridge Audio, Estelon, Wilson Audio and more.
We offer our clients a fantastic solution to their sound needs. Whether the system is used in a home or business, or if the goal is to setup an entertainment establishment with all of the bells and whistles, we can assist you with everything you need. You can shop online today or you can give us a call to discuss your needs. With our experience and our passion for great audio, we can give you great advice for getting your system up and running.